Unbrick lg lte 2 f160 lsk qhsusb_dload no recovery no download mode

I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....

1. Download the qualcom drivers and install it from given link.

https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port

2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi

You shall have a tool Boar Diag v3.99c folder and two folder named S and L.

3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.

4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test

In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)

FOR 160L
D1L(MSM8960 LV)

Select Com Port shown in device manager of your computer.

In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3

Rest all should be unchecked

PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn

Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window

5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.

PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u

Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.

After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.

Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.

6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.

I hope this will resolve your issue. As i did.

7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
.

THATS ALL WHAT I HAVE FOR MY FRIENDS.

IF I HELPED YOU THEN PLZ PRAY FOR ME. THANKS ALOT