This application allows to really and virtually disable the proximity sensor while in calls, made and received and to re enable at will. This application does not require any third party software in general. However, only one menu selection, which really disallows the proximity sensor when in calls, made or received, requires XDA Framework and Xposed Installer and Xposed Jar. The application will work without these too.
This application allows the user to make and receive calls with proximity sensor disabled and or or directly with speakerphone powered thus the proximity sensor will not power the screen down. This application also allows the user to select the proximity sensor to control the screen. The screen can be selected to be always powered or not.
When the speaker when in call is chosen, all calls made and received will be made with a powered speakerphone and the proximity sensor will not power the screen down when a call is made or received. The volume of the speaker can be adjusted to preserve battery energy. The device can be put in a zip bag and run while in the zip bag without taken out. This is great for wet weather and in a dusty and unfriendly environment. This also is a great health and personal hygiene option as the device will not be contaminated by ear wax and other sources of contamination and bacteria.
When proximity sensor control is chosen, the screen of the phone powers down when there is an object close to the proximity sensor. Thus, the screen will automatically power down when the phone is put in the pocket or put screen down on the table. This works regardless whether the user has chosen to keep the screen to be always powered or whether the screen is normally controlled by the OS. When the phone is away from and object, the screen powers automatically unless the screen has previously been powered down not by the proximity sensor but by other means, such as the OS or a press on the Power Button.
When the screen has been chosen to be always powered, the user can use the phone as a flash light which can easily be turned on by, say, placing the phone close to the chest. This way, the user can shine light for a while to see around, then, quickly stop the light and then, whenever needed, to quickly turn the light on again with just a movement of one hand and not by the power button although the power button will also work as set up. This way, the user would save battery energy as compared to constantly flashing light which may not be needed. The power button still works but the proximity sensor, when used as a switch, is easier to use than the power button.
More information is available in the application.
XDA:DevDB Information
Proximity Sensor and Screen, Tool/Utility for all devices (see above for details)
Contributors
StevenStanleyBayes
Source Code: http://www.steven-stanley-bayes.com/ProximitySensor.apk
Version Information
Status: Stable
Created 2015-08-16
Last Updated 2015-08-16
This application allows the user to make and receive calls with proximity sensor disabled and or or directly with speakerphone powered thus the proximity sensor will not power the screen down. This application also allows the user to select the proximity sensor to control the screen. The screen can be selected to be always powered or not.
When the speaker when in call is chosen, all calls made and received will be made with a powered speakerphone and the proximity sensor will not power the screen down when a call is made or received. The volume of the speaker can be adjusted to preserve battery energy. The device can be put in a zip bag and run while in the zip bag without taken out. This is great for wet weather and in a dusty and unfriendly environment. This also is a great health and personal hygiene option as the device will not be contaminated by ear wax and other sources of contamination and bacteria.
When proximity sensor control is chosen, the screen of the phone powers down when there is an object close to the proximity sensor. Thus, the screen will automatically power down when the phone is put in the pocket or put screen down on the table. This works regardless whether the user has chosen to keep the screen to be always powered or whether the screen is normally controlled by the OS. When the phone is away from and object, the screen powers automatically unless the screen has previously been powered down not by the proximity sensor but by other means, such as the OS or a press on the Power Button.
When the screen has been chosen to be always powered, the user can use the phone as a flash light which can easily be turned on by, say, placing the phone close to the chest. This way, the user can shine light for a while to see around, then, quickly stop the light and then, whenever needed, to quickly turn the light on again with just a movement of one hand and not by the power button although the power button will also work as set up. This way, the user would save battery energy as compared to constantly flashing light which may not be needed. The power button still works but the proximity sensor, when used as a switch, is easier to use than the power button.
More information is available in the application.
XDA:DevDB Information
Proximity Sensor and Screen, Tool/Utility for all devices (see above for details)
Contributors
StevenStanleyBayes
Source Code: http://www.steven-stanley-bayes.com/ProximitySensor.apk
Version Information
Status: Stable
Created 2015-08-16
Last Updated 2015-08-16
Aucun commentaire:
Enregistrer un commentaire