Hello Everyone,
Today we'll be unlocking the Samsung Galaxy SM-G920T 5.1.1 using the Z3X Samsung Tool or Octopus Box Samsung, which both required you to root your Galaxy S6 SM-G920T. I will guide throughout the steps to root your phone without tripping the knox counter, which will allow us to use one of the programs above. We will use the (sboot.bin) which allows their service centers to do flashing and repairs to the device without tripping the Knox counter. The modified bootloader also disables write protection on the device. Once you are done rooting and unlocking the Galaxy S6 SM-G920T, we will restore the official firmware 5.1.1. Don't worry, your phone is unlock permanently regardless of the times you restore the phone.
The steps to root your Samsung Galaxy SM-G920T 5.1.1
1. Install Samsung USB Drivers
2. Put the phone in download mode by: Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.
3. Plug phone in and wait for drivers to install if necessary.
4. Download Odin
5. Download sboot.bin for Galaxy S6
6. Open odin and then you should now see phone’s modem port highlighted in blue.
7. Click on BL tab and select the correct sboot.bin that you downloaded above. Then click start.
8. When phone comes back on, power it off again and put into download mode.
9. Download UniBase_BOG8_v2
10. Open odin again and this time select AP tab and select UniBase_BOG_V2 file and click start.
11. You're Done!!!
When the phone turn on, it will be rooted. To verify that knox has not been tripped go back to download mode and it should still say KNOX WARRANTY: 0 (0X0000). Now you can go ahead and unlock your Samsung Galaxy SM-G920T 5.1.1 using the Z3X Samsung Tool or Octopus Box Samsung. The sboot.bin isn’t playing very well, causing issues with Calls and Fingerprint sensor, but it is only for the meantime until you restore your phone back to the stock firmware.
Restoring your Samsung Galaxy SM-G920T to the stock firmware 5.1.1
1. Download the SM-G920T stock firmware
2. Open and extract the firmware file, then you should get the a file in .tar.md5 format.
3. Put the phone in download mode by: Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.
4. Open odin and then you should now see phone’s modem port highlighted in blue.
5. Click the AP button tab and select G920TUVU2COF6_G920TTMB2COF6_G920TUVU2COF6_HOME.tar .md5
6. Make sure Re-partition checkbox is NOT selected, under the Options tab. Click start and wait for it to finish completely.
7. Enjoy!!! The G920TUVU2COF6 Android 5.1.1 firmware on your Galaxy SM-G920T.
I hope this guide helps everyone who wants to unlock their Samsung Galaxy SM-G920T, but needs their phone rooted first temporarily.
Today we'll be unlocking the Samsung Galaxy SM-G920T 5.1.1 using the Z3X Samsung Tool or Octopus Box Samsung, which both required you to root your Galaxy S6 SM-G920T. I will guide throughout the steps to root your phone without tripping the knox counter, which will allow us to use one of the programs above. We will use the (sboot.bin) which allows their service centers to do flashing and repairs to the device without tripping the Knox counter. The modified bootloader also disables write protection on the device. Once you are done rooting and unlocking the Galaxy S6 SM-G920T, we will restore the official firmware 5.1.1. Don't worry, your phone is unlock permanently regardless of the times you restore the phone.
The steps to root your Samsung Galaxy SM-G920T 5.1.1
1. Install Samsung USB Drivers
2. Put the phone in download mode by: Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.
3. Plug phone in and wait for drivers to install if necessary.
4. Download Odin
5. Download sboot.bin for Galaxy S6
6. Open odin and then you should now see phone’s modem port highlighted in blue.
7. Click on BL tab and select the correct sboot.bin that you downloaded above. Then click start.
8. When phone comes back on, power it off again and put into download mode.
9. Download UniBase_BOG8_v2
10. Open odin again and this time select AP tab and select UniBase_BOG_V2 file and click start.
11. You're Done!!!
When the phone turn on, it will be rooted. To verify that knox has not been tripped go back to download mode and it should still say KNOX WARRANTY: 0 (0X0000). Now you can go ahead and unlock your Samsung Galaxy SM-G920T 5.1.1 using the Z3X Samsung Tool or Octopus Box Samsung. The sboot.bin isn’t playing very well, causing issues with Calls and Fingerprint sensor, but it is only for the meantime until you restore your phone back to the stock firmware.
Restoring your Samsung Galaxy SM-G920T to the stock firmware 5.1.1
1. Download the SM-G920T stock firmware
2. Open and extract the firmware file, then you should get the a file in .tar.md5 format.
3. Put the phone in download mode by: Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.
4. Open odin and then you should now see phone’s modem port highlighted in blue.
5. Click the AP button tab and select G920TUVU2COF6_G920TTMB2COF6_G920TUVU2COF6_HOME.tar .md5
6. Make sure Re-partition checkbox is NOT selected, under the Options tab. Click start and wait for it to finish completely.
7. Enjoy!!! The G920TUVU2COF6 Android 5.1.1 firmware on your Galaxy SM-G920T.
I hope this guide helps everyone who wants to unlock their Samsung Galaxy SM-G920T, but needs their phone rooted first temporarily.
Aucun commentaire:
Enregistrer un commentaire