Hey everyone. I am running a stock, rooted OS (v 4.4.2). I have version 1.4 of the remote play app installed, and it works awesome! With the on screen controls it works great, and is very snappy.
I am running into a bunch of issues getting my DS4 to pair to the device via bluetooth.
I tried doing the native bluetooth pairing (holding share + PS on the controller, and scanning on the GS5). The device showed up, but if I tried to pair it, it would literally just sit there and never do anything.
Next, I ended up having to use SixAxisPairTool in conjunction with SixAxis Compatibility Checker (as mentioned in other threads). I used the compatibility checker to get my BT local address, and then I used the PairTool to change the master address to the one listed. When I try to pair the device with bluetooth inside the compatibility checker, it flat out fails and says no devices are connected, and to connect with usb.
Except the instructions on their website say the exact opposite - to disconnect the controller from usb and press the PS button to pair. When I stop trying to pair in the compatibility checker, I get an error saying that the maximum number of devices are connected.
So, I closed out of the compatibility checker, and opened back up the native bluetooth settings, and tried repairing again. This time the device showed up, and it is now listed as paired. But there is no light on the DS4. If I press the PS button, it does one of the following: it flashes white constantly, it flashes white once and stays lit for a few seconds and then goes off, it flashes white several times then stays on for a second.
I have unpaired the device inside the phone, and then pressed the PS button, and I get prompted with a request to pair the device. When I accept, the same thing happens. The light disappears on the back of the DS4, and nothing happens.
I tried using a joystick tester to see if it was connected and the light just didn't work properly, but there doesn't seem to be any communication between the two devices.
I would really like to avoid having to buy an OTG cable (namely because I can't seem to find a decent one except for questionably sourced ones from a reliable vendor), and really was hoping for a wireless setup.
Can anyone help a brother out here? I have had a prompt in my dock for months about a system update for my phone, but I have been hesitant to install it because I don't want to lose root, and none of the ROMs out there seem to be vanilla stock + root.
Edit:
I unpaired the controller from my phone, and opened back up the compatibility checker. Ignoring the pair button, I just started the software. Then I hit the PS button and it flashes white 2-3 times and stops. If I do this again, it will repeat. No text changes on the screen. I can do this two more times. When I attempt to do this a fifth time, I get an error message saying "Maximum number of clients already connected."
I am running into a bunch of issues getting my DS4 to pair to the device via bluetooth.
I tried doing the native bluetooth pairing (holding share + PS on the controller, and scanning on the GS5). The device showed up, but if I tried to pair it, it would literally just sit there and never do anything.
Next, I ended up having to use SixAxisPairTool in conjunction with SixAxis Compatibility Checker (as mentioned in other threads). I used the compatibility checker to get my BT local address, and then I used the PairTool to change the master address to the one listed. When I try to pair the device with bluetooth inside the compatibility checker, it flat out fails and says no devices are connected, and to connect with usb.
Except the instructions on their website say the exact opposite - to disconnect the controller from usb and press the PS button to pair. When I stop trying to pair in the compatibility checker, I get an error saying that the maximum number of devices are connected.
So, I closed out of the compatibility checker, and opened back up the native bluetooth settings, and tried repairing again. This time the device showed up, and it is now listed as paired. But there is no light on the DS4. If I press the PS button, it does one of the following: it flashes white constantly, it flashes white once and stays lit for a few seconds and then goes off, it flashes white several times then stays on for a second.
I have unpaired the device inside the phone, and then pressed the PS button, and I get prompted with a request to pair the device. When I accept, the same thing happens. The light disappears on the back of the DS4, and nothing happens.
I tried using a joystick tester to see if it was connected and the light just didn't work properly, but there doesn't seem to be any communication between the two devices.
I would really like to avoid having to buy an OTG cable (namely because I can't seem to find a decent one except for questionably sourced ones from a reliable vendor), and really was hoping for a wireless setup.
Can anyone help a brother out here? I have had a prompt in my dock for months about a system update for my phone, but I have been hesitant to install it because I don't want to lose root, and none of the ROMs out there seem to be vanilla stock + root.
Edit:
I unpaired the controller from my phone, and opened back up the compatibility checker. Ignoring the pair button, I just started the software. Then I hit the PS button and it flashes white 2-3 times and stops. If I do this again, it will repeat. No text changes on the screen. I can do this two more times. When I attempt to do this a fifth time, I get an error message saying "Maximum number of clients already connected."
Aucun commentaire:
Enregistrer un commentaire